Pulsar Core FXQ55 BW Thermal Imaging Monocular
Core FXQ55 BW Thermal Imaging Monocular

Core FXQ55 BW Thermal Imaging Monocular

Available around August 2018
Article number:
+ gratis verzending
Incl. tax
0 op voorraad. Available around August 2018
Add to cart


The Pulsar 5x30 Monocular can be attached to the Core FXQ35/55 thermal module and used as a 5x power thermal imaging scope. Along with this, the Pulsar 5x30 is a fully-functional daylight observation device.

Product information

Core FXQ35/55 BW as Observation Device

The Pulsar 5x30 Monocular (#71011) included in the package can be attached to the Core FXQ35/55 thermal module and used as a 5x power thermal imaging scope. Along with this, the Pulsar 5x30 is a fully-functional daylight observation device.

Core with other Day Optical Devices

Core allows to turn the majority of day scopes with lens diameters from 40 mm to 56 mm into a thermal device. Quick-release bayonet mount allows remove it from the scope in seconds. To install the Core onto the front optical bell of a daylight scope, specially designed Cover Ring Adapters (bought separately) with a set of reducing rings are used (the rings can be used as necessary depending on the diameter of the optical bell). The adapter is permanently attached to the optical bell of a daylight scope. This allows the Core to be quickly installed in front of the lens for nighttime use. When the Core is not used, the adapter accommodates a protective cap that covers the lens of a scope in the daytime.

Fully Waterproof

IPX7 waterproof-rated protection ensures the Core Front Attachment performs perfectly in wet weather, even during intense rain, snowfall and submersion in 1 m. of water for up to 30 min. (IEC 60529).

External Power Supply

The Core FXQ includes a universal power adapter. Operation time can be significantly prolonged by using high-capacity external power supply units, which can be attached via a weather-resistant micro-USB port and DC 2.1 x 5.5 mm.

Operating Modes

The Core features three operating modes: City (enhanced contrast), Forest (low contrast) and Identification (improved rendering of heat signature details). Each mode optimizes imaging based on viewing conditions.


The Core offers three calibration modes: Silent Manual (“M”), Automatic (“A”) and Semi-Automatic (“H”). “A” mode implies calibration without user participation (process initiation, actuation of the shutter takes place automatically). In “H” mode, the user determines if calibration is required based on image quality. If calibration is needed, the operator uses the “Cal” button. In “M” mode, manual calibration is accomplished by pressing the “Cal” button when the lens cap is closed. “M” mode is recommended for hunting due to silent operation.

Wireless Remote Control

An ergonomic, wireless remote control puts basic Core controls at your fingertips for comfortable, convenient, hands-off operation.

Wide Range of Observation Temperatures

With a frost-resistant AMOLED display, the Core Thermal Imaging Scope is designed to deliver flawless performance at an extreme temperature range of -25° - +50°C.



Core FXQ35 BW

Core FXQ55 BW

384x288 pix. @ 17 µm
384x288 pix. @ 17 µm
Objective lens F38/1.2 F50/1.2
Field of view (HxV), degrees / m@100m
9.8x7.4 / 17.2x12.9
5.6х4.2 / 9.7x7.3
Detection range, m 1350 1800
Type Uncooled Uncooled
Resolution, pixels
Pixel pitch, µm 17 17
Frame rate, Hz 50 50
Objective lens F38/1.2 F50/1.2
Magnification in monocular mode / attachment mode, x
5 / -
5 / -
Field of view (HxV), degrees / m @ 100 m 9.8x7.4 / 17.2x12.9 5.6х4.2 / 9.7x7.3
Recommended magnification of the day scope, x 1 – 3 2 – 5
Resolution, pixels 640x480 640x480
Range Performance    
Detection range, m 1350 1800
Environmental Characteristics    
Degree of protection, IP code (IEC60529) IPХ7 IPХ7
Operating temperature range, °С -25 – +50 -25 – +50
Weight & Size    
Dimensions, mm 300x71x67 (with Pulsar 5x30 monocular) 300x71x67 (with Pulsar 5x30 monocular)
Weight, kg 0.65 0.66
Power Supply    
Output voltage, V 5 – 7.2 5 – 7.2
Battery type 2xCR123A 2xCR123A
Capacity, mAh 2000 2000
Operating time on battery pack (at t=22°C), h * 4 4
External power supply 5V 5V
Trade Data    
SKU (Model #) 77371BW 77372BW


































Click here for the manual

Read more

Customer reviews

0 stars based on 0 reviews

Related products

Pulsar DN Cover Ring Adapter
€109,00Incl. tax
Rusan Adapter for Core / DFA 75 / DN55
€181,58Incl. tax
Olight RCR123A Battery for H1R / S10RIII
€9,90Incl. tax

Add your review

Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »