Survivor Rain Poncho

Part Materials

• Multi functional - can be used as a hide
• Packable
• Breathable lightweight rain poncho

Care instructions 

• Water Repellent

  Products impregnated with water repellent treatment are water- and dirt-resistant. Stains are easy to remove. Extremely heat-resistant and has a very smooth surface.

• Breathable

  No matter what weather situation you find yourself in, choosing Deerhunter’s clothing with one of its four membranes, will provide you with a breathable product. This allows you to maintain your comfort while being active and subsequently enjoy your experience more.

• Windproof

  If you choose one of Deerhunter’s products which have a membrane, it will automatically be windproof. Windproofing is the garment’s ability to keep the wind out. If you sit for a long time in a strong breeze, you will quickly appreciate the fact that the garment is windproof. Windproof hunting apparel helps to keep you warm so that you can focus on the hunt.

• Taped seams

  When the clothing is stitched, tiny holes are created in the fabric by the seams. To avoid moisture seeping through these holes, it is possible to tape the seams. This protects exposed areas and increases the product's waterproofness.

• DEERHUNTER® Stormliner®

  The Deerhunter Stormliner® membrane is typically laminated to the outer fabric or between two layers of fabric, and is used on products without taped seams. Deerhunter Stormliner® membrane allows a very high level of breathability.

• Waterproof & Breathability - 3.000/3.000

  Water penetration resistance is measured in “millimetre water column pressure”. The water column pressure is measured by placing a liquid column gauge over the material so that material with water penetration resistance 5.000 mm can keep water out from a five metre (5.000 mm) gauge. Material with a water penetration resistance of 10.000 mm can resist water from a 10 metre (10.000 mm) gauge, etc. MVP value indicates breathability of a membrane. MVP value is an expression of the quantity of water vapour that can escape through one square meter of a membrane within 24 hours. A breathable product rated at 5.000 can therefore “breathe” 5.000 g (5 litres) water vapour per square metre in 24 hours.